HP ProLiant BL280c G6 Server-Blade - Manual (Page 22)

Hardware options installation 22
8. Route the cables through the air baffle.
9. Install the air baffle (on page 13 ).
10. Connect hard drive data cable 1 to SATA connector 1 on the system board.
11. Connect hard drive data cable 2 to SATA connector 2 on the system board.
12. Connect the hard drive power cables to the hard drive power connectors on the system board. The
power cables can connect to either of the hard drive power connectors on the system board.
13. Install the access panel (on page 13 ).
14. Install the server blade (" Installing a server blade " on page 18 ).
Processor option
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.