Removing a hot-plug sas hard drive – HP ProLiant ML570 G4 Server User Manual

Page 56

Advertising
background image

Hardware options installation 56

3.

Install the hard drive.

4.

Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations.

Removing a hot-plug SAS hard drive

CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays

are populated with either a component or a blank.

1.

Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations.

2.

Back up all server data on the hard drive.

3.

Remove the hard drive.

Advertising
See also other documents in the category HP Computer hardware: