HP Insight Management Agents - Manual (Page 126)

◦ Stop Bits—Displays the number of stop bits to use for pager messages.
◦ Parity—Displays the type of parity to user for pager messages.
•
Modem Control Strings—This table contains the modem control strings for the communication
device including the following:
◦ Reset—Displays the string used to reset the modem.
◦ Initialize—Displays the string used to initialize the modem.
◦ Dial Prefix —Displays the string pre-pended to phone numbers before dialing.
Self Test Results
The Self Test Results section indicates various error-status depending on the Remote Insight model.
The following is the list of error-status fields:
•
Busmaster I/O Reads
•
Memory
•
Internal Modem Firmware
•
Internal Modem
•
External Port
•
Keyboard Interface
•
Battery Interface
•
NVRAM Interface
•
NVRAM Write/Read/Verify
•
Video SideCard
•
PCMCIA
•
NIC
•
Mouse
•
CPLD
•
SRAM
•
EEPROM
•
I2C
•
Boot Block
•
Thread Initialization
•
Rack Infrastructure
Reset Integrated Lights-Out (iLO)
The Reset Remote Insight button is used to Reset the Remote Insight Board. Once the Remote Insight
is reset, The HP Insight Management Agents takes a minimum of two minutes to reconnect with the
Remote Insight depending upon the poll interval.
126 Agent information