HP Insight Management Agents - Manual (Page 67)

•
Side Panel—Displays the status of the side panel of the drive enclosure, or box. The following
values are possible:
◦ In Place—The side panel is closed.
◦ Removed—The side panel is not in place or not completely closed.
◦ Unknown—The Storage Agents do not recognize the side panel status. You may need
to upgrade your software.
◦ No Panel Detection—This storage system does not support side panel detection.
•
Duplex Option—Displays the duplex option installed in this storage system. The following
values are possible:
◦ Duplex Top—This storage system is the top part of a duplexed unit.
◦ Duplex Bottom—This storage system is the bottom part of a duplexed unit.
◦ None—A duplex option is not installed.
•
Power Supply Status—Displays the status of the redundant power supply. The following values
are possible:
◦ OK—All component power supplies that make up the redundant power supply are in
normal working order.
◦ Degraded—One of the component power supplies that make up the redundant power
supply has failed. The drive system (either a drive subsystem or a power supply for the
main unit) continues to operate; however, if the remaining power supply should fail, the
drive system loses power and data loss could occur. To correct this situation, schedule a
time to bring the device down and replace the failed power supply.
◦ Unknown—The Storage Agents do not recognize the redundant power supply. You may
need to upgrade your software.
◦ No Redundant Power Supply—This ProLiant server does not support a redundant power
supply.
•
Paths—Displays the status and role of each data path to the storage system (for multipath
capable hardware only). The following values are possible:
◦ Path—Indicates the path to the storage system. Each path is identified by a descriptor.
For example, "Port 2E Box 1" indicates a path from the host adapter external port number
2 ("Port 2E") to the first box.
◦ Status—Indicates the status of the data path. Possible values are:
OK—The path is operational. –
– Link down—The path is not operational.
– Unknown—The path status cannot be determined.
◦ Role—Indicates the role of this path in the configuration. Possible values are:
– Active—This path is the preferred data path to the storage system.
– Alternate—This path is the alternate data path to the storage system.
– Unknown—The role of this path cannot be determined.
Storage agent 67