Inserting and removing a sim – HP ZBook 17 Mobile Workstation User Manual
Page 30
in the HP Mobile Broadband information provided with your computer or the mobile network operator
may provide it separately from the computer.
For information about inserting and removing the SIM, see the
section in this chapter.
For information about HP Mobile Broadband and how to activate service with a preferred mobile
network operator, see the HP Mobile Broadband information included with your computer.
Inserting and removing a SIM
CAUTION:
To prevent damage to the connectors, use minimal force when inserting a SIM.
To insert a SIM, follow these steps:
1.
Shut down the computer.
2.
Close the display.
3.
Disconnect all external devices connected to the computer.
4.
Unplug the power cord from the AC outlet.
5.
Turn the computer upside down on a flat surface, with the battery bay toward you.
6.
Remove the battery.
7.
Insert the SIM into the SIM slot, and gently push the SIM into the slot until it is firmly seated.
NOTE:
See the image on the battery bay to determine which way the SIM should be inserted
into your computer.
8.
Replace the battery.
NOTE:
HP Mobile Broadband will be disabled if the battery is not replaced.
9.
Reconnect external power.
10.
Reconnect external devices.
11.
Turn on the computer.
To remove a SIM, press in on the SIM, and then remove it from the slot.
20
Chapter 3 Connecting to a network