Installing a hard drive – HP ZBook 17 Mobile Workstation User Manual
Page 64
Advertising
4.
Remove the battery and the battery cover. (See
Replacing a user-replaceable battery
.)
5.
Loosen the 3 hard drive cover screws (1). Pull the hard drive latch and disengage the hard drive
from the connector (2), and then remove the hard drive (3).
Installing a hard drive
NOTE:
Your computer may look slightly different from the illustration in this section.
To install the hard drive:
1.
Insert the hard drive into the hard drive bay at an angle, and then lay the hard drive flat in the
hard drive bay (1).
2.
Engage the hard drive with the connector and lock the latch (2).
3.
Tighten the hard drive screws (3) to secure the hard drive in place.
54
Chapter 8 Drives
Advertising