HP Netserver L Server series - Manual (Page 35)

Chapter 3 Opening and Closing the
HP NetServer
27
8. To close the satellite chassis' top cover:
a. Swing the cover back down.
b. Insert your fingers in the fingerholds again and push inward.
c. While maintaining finger pressure in the fingerholds, slide the cover
about one-half inch toward the rear of the chassis, to lock the cover
closed.
d. Release the fingerholds.
Accessing the Lower Board Cage
The lower board cage holds the HP NetServer's memory boards, the system
control board, and the optional SCSI extender. To reach these boards:
1. Extend or detach the satellite chassis from the base chassis. See Chapter 3
for details.
2. Remove the lower fan module, as shown in Figure 3-9:
a. Grasp the handles on either end of the unit and push them toward each
other.
b. While continuing to push on the handles, pull the fan module toward
you. The module slides backward off its mounting rails.
Figure 3-9. Removing the Lower Fan Module