HP Netserver L Server series - Manual (Page 99)

Chapter 11 Troubleshooting
91
If the System Passes the POST but Shuts Down While Booting
Check for fan failures, power supply failures, or processor failures. Check the
control panel LCD to see whether it indicates the correct number of power
supplies and processors that are present in the system.
Error Messages
If you get an error message, an error message utility on the Navigator CD-ROM
can help you find a possible solution.
When the HP NetServer displays an error message:
1. Insert your HP Navigator CD-ROM into the CD-ROM drive and press the
Reset button on the front of the HP NetServer.
2. The HP NetServer boots from the CD-ROM. The error message utility
automatically displays the error message and a problem-solving
procedure.
NOTE For a complete list of error messages and solutions see the HP
NetServer Information Assistant program on the HP Navigator
CD-ROM. HP Information Assistant runs on an HP Vectra or
other PC running Windows 3.1 and above, Windows 95 or
Windows NT.