HP OmniBook 3000 Notebook PC - Manual (Page 12)

Using OmniBook Plug-In Modules
Using the CD-ROM Drive
1-12
To use the CD-ROM drive safely
•
If the unit requires service, contact an authorized HP service center—see the
OmniBook Support and Service booklet.
•
Do not attempt to make any adjustment of the unit.
•
Avoid direct exposure to the laser beam—do not open the unit.
CLASS 1 LASER PRODUCT
LASER KLASSE 1
To open the CD-ROM drive manually
If you lose power to the OmniBook, or if you’ve removed the CD-ROM module from
the OmniBook, you can manually open the CD-ROM drive to remove a CD.
•
Insert a paper clip into the recessed hole shown below.