HP OmniBook 3000 Notebook PC - Manual (Page 22)

Troubleshooting
Solving Problems with Plug-In Accessories
1-22
Zip drive problems
If a Zip drive doesn’t work
•
Remove and reinsert the Zip disk.
•
Remove and insert the Zip drive again.
•
Restart the OmniBook.
CD-ROM drive problems
If the CD-ROM drive stops responding
•
Restart the OmniBook.
•
If restarting the OmniBook does not solve the problem, remove and insert the
CD-ROM drive again.
If you cannot boot from a CD in the CD-ROM drive
•
Check that the CD is bootable.
•
Remove and insert the CD-ROM drive again.
•
Restart the OmniBook.
•
Run the BIOS Setup utility to make sure that the CD-ROM drive is the first boot
device. See the OmniBook Reference Guide for instructions on running the BIOS
Setup utility.
Battery problems
If the OmniBook doesn’t turn on with a fresh battery
•
The new battery pack may be low. Plug in the ac adapter.