HP ProLiant SL4545 G7 Server - Manual (Page 40)

Hardware options installation 40
3. Install the hard drive.
4. Determine the status of the drive from the drive LED definitions (on page 7 ).
Controller options
The chassis I/O module ships standard with an HP Smart Array P420i controller.
• For more information about product features, specifications, options, configurations, and compatibility,
see the product QuickSpecs on the HP Product Bulletin website
( http://www.hp.com/go/productbulletin ).
• For array configuration information, see Option ROM Configuration for Arrays (on page 50 ).
• For more information about the controller and its features, see the HP Smart Array Controllers for HP
ProLiant Servers User Guide on the HP website
( http://www.hp.com/support/SAC_UG_ProLiantServers_en ). Features and functions of the P420i are
shared with the P420.
HP Trusted Platform Module option
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP Product Bulletin website (
http://www.hp.com/go/productbulletin ).
Use these instructions to install and enable a TPM on a supported node. This procedure includes three
sections:
1. Installing the Trusted Platform Module board (on page 41 ).
2. Retaining the recovery key/password (on page 42 ).
3. Enabling the Trusted Platform Module (on page 43 ).
Enabling the TPM requires accessing RBSU (" HP ROM-Based Setup Utility " on page 48 ). For more
information about RBSU, see the HP website ( http://www.hp.com/go/ilomgmtengine/docs ).
TPM installation requires the use of drive encryption technology, such as the Microsoft Windows BitLocker
Drive Encryption feature. For more information on BitLocker, see the Microsoft website
( http://www.microsoft.com ).