HP ProLiant DL360 G5 Server User Manual
Page 61
Hardware options installation 61
7.
Disconnect the hard drive backplane power cable from the system board.
8.
Turn the quarter-turn fasteners counter-clockwise and lift the integrated array controller away from the
system board.
9.
Connect the hard drive backplane power cable to the system board.
10.
Install and route the cables from the PCI SAS or SATA array controller to the SAS hard drive
backplane.
CAUTION: When routing cables, use the cable trough between fan modules 1 and 2. Be sure the cables
do not interfere with fan module installation. Be sure to route the cables around the access panel mounting
pin bracket so as not to interfere with access panel installation.
CAUTION: When routing cables, always be sure that the cables are not in a position where they can be
pinched or crimped.
11.
Install fan modules 1 and 2 ("
Remove and install a fan module
12.
Install the air baffle.
13.