HP Photosmart Pro B9180 Photo Printer - Manual (Page 31)

convert colors between each device's color space. The HP Photosmart Pro B9100
series software installation installs HP ICC profiles automatically for the printer.
● Calibrating the monitor: Monitors exhibit a color degradation over time that can
interfere with producing professional quality printed photography. As a result, the
ICC profile that comes with most new monitors gradually becomes invalid and no
longer accurately reflects the color space available on the device. Calibrating the
monitor at least once a month to produce a custom ICC profile is the best way to
ensure that the color space available on the monitor is accurately defined for your
color management system. You can calibrate a monitor visually using a system or
utility software program, such as Adobe Gamma, but this type of calibration does
not meet the high quality standards expected for professional photography.
Professionals usually invest in a calibration kit consisting of a software program and
a piece of hardware that captures the current state of the RGB environment on the
monitor and saves it as a custom ICC profile. Monitor calibration kits are available
from GretagMacBeth, Monaco Systems, and LaCie, as well as other manufacturers.
To print using application-based color management features, you have to change
settings in the printer driver and in the image editing software program. Here is one
example of a typical print job using application-based color management in Adobe
Photoshop (version 7 or CS). See the documentation that came with your image editing
software program for complete instructions on using the product's color management
features.
To print using application-based color management
1.
Open the photo you want to print in Adobe Photoshop.
2. Select File, and click Print with Preview in Adobe Photoshop.
3. Make sure Show More Options is checked in the Print with Preview dialog box,
and then select Color Management from the drop-down list.
4. In the Print Space area of the Print with Preview dialog box, select the appropriate
HP Photosmart Pro B9100 series profile for the paper and ink set you are using.
The HP Photosmart printer software installer installed several profiles for you
automatically.
5. Select Perceptual from the Intent drop-down list. Selecting the Use Black Point
Compensation option is also recommended.
6. Click Page Setup in the Print with Preview dialog box, set up the page for the
current image, and then click OK.
7. Click Print.
Windows users
a.
Click Properties in the Print dialog box.
b. Click the Color tab in the Print dialog box.
c. Select Managed by application from the Color Management area of the
Print dialog box, and then click OK.
d. Click the Features tab, select an appropriate paper type from the Paper
Type drop-down list, and then click OK.
e. Click OK.
4 International Color Consortium. ICC enables profile-based color management solutions. For more
information, see www.color.org.
Chapter 3
28 HP Photosmart Pro B9100 series printer