HP Deskjet 6943 Printer - Manual (Page 95)

State of the lights Task
Connection light is on and the Error light
flashes twice
The camera has requested an
unsupported command.
Bluetooth printing problems
Bluetooth device cannot find the printer
Try one of the following solutions:
●
Make sure the HP Bluetooth Wireless Printer Adapter is plugged into the camera
port on the front of the printer. The light on the adapter double-blinks once a second
when the adapter is ready to receive data.
● You might be too far from the printer. Move the device with Bluetooth wireless
technology closer to the printer. The maximum recommended distance between the
device with Bluetooth wireless technology and the printer is 10 meters (30 feet).
No page came out of the printer
The printer might not recognize the type of file sent by the device with Bluetooth wireless
technology. Reformat the file to a supported file type and then resend.
A blank page came out of the printer
A blank page ejected from the printer signifies an unsupported file type or the file being
printed is corrupted or too large.
Print quality is poor
The image you printed might be low resolution. For better results in the future, set the
device to a higher resolution, if possible. Be aware that pictures taken with VGA-
(continued)
User's guide 93