HP LaserJet Pro 200 color Printer M251nw - Manual (Page 104)

Once an HP supply has reached very low, HP's Premium Protection Warranty on that supply has
ended. All print defects or cartridge failures incurred when an HP supply is used in continue at very low
mode will not be considered to be defects in materials or workmanship in the supply under the HP Print
Cartridge Warranty Statement.
Manual duplex Load tray 1 Press [OK]
Description
The first side of a manual duplex job has printed, and the page needs to be loaded to process the
second side.
Recommended action
Load the page in the tray with the side to be printed face up, and the top of the page away from you,
and then press the OK button.
Memory is low Press [OK]
Description
The product memory is almost full.
Recommended action
Press the OK button to finish the job, or press the Cancel button to cancel the job.
Break the job into smaller jobs that contain fewer pages.
Misprint Press [OK]
Description
Paper has been delayed as it moves through the product.
Recommended action
Press the OK button to clear the message.
To avoid this problem, try the following solutions:
1. Adjust the paper guides in the tray. Make sure the front paper guide is pushing the paper against
the back edge of the tray.
2. Use paper that meets HP specifications. Store paper unopened in its original packaging.
3. Use the product in an area that meets the environmental specifications for this product.
Print failure, press OK. If error repeats, turn off then on.
Description
The product cannot process the page.
92 Chapter 5 Solve problems ENWW