HP LaserJet Pro 200 color Printer M251nw - Manual (Page 82)

Print when a toner cartridge is at estimated end of
life
Supply-related notifications are communicated on the product control panel, Desktop Alerts, software
applications, and network alerts.
A <Supply> Low message—where <Supply> is the color toner cartridge: The product indicates when
a supply level is low. Actual cartridge life remaining may vary. Consider having a replacement
available to install when print quality is no longer acceptable. The supply does not need to be replaced
now.
A <Supply> Very Low message. The product indicates when a supply level is very low. Actual
cartridge life remaining may vary. Consider having a replacement available to install when print
quality is no longer acceptable. The supply does not need to be replaced now unless the print quality is
no longer acceptable. Once an HP supply has reached Very Low, HP’s Premium Protection Warranty
on that supply has ended.
Print-quality problems can occur when using a toner cartridge that is at its estimated end of life. The
supply does not need to be replaced at this point in time unless the print quality is no longer
acceptable.
NOTE: Using the Continue setting allows printing beyond Very Low without customer interaction
and can result in unsatisfactory print quality.
Enable or disable the At Very Low settings (LCD control panel)
NOTE: This section applies to the HP LaserJet Pro 200 color M251n Printer model only.
You can enable or disable the default setting at any time, and you do not have to re-enable it when you
install a new toner cartridge.
1. At the control panel, press the OK button to open the menus.
2. Open the following menus:
● System Setup
● Supply Settings
● Black Cartridge or Color Cartridges
● Very Low Setting
3. Select one of the following options.
● Select the Continue option to set the product to alert you that the toner cartridge is very low,
but to continue printing.
● Select the Stop option to set the product to stop printing until you replace the toner cartridge.
● Select the Prompt option (the default option) to set the product to stop printing and prompt
you to replace the toner cartridge. You can acknowledge the prompt and continue printing.
The customer can choose to be prompted in 100 pages, 200 pages, 300 pages, 400 pages
70 Chapter 4 Manage and maintain the product ENWW