Economy settings, Print with economode, Set the sleep delay – HP LaserJet Pro 200 color Printer M251nw User Manual
Page 79: Set the sleep delay (lcd control panel), Print with economode set the sleep delay
Economy settings
Print with EconoMode
This product has an EconoMode option for printing drafts of documents. Using EconoMode can use less
toner. However, using EconoMode can also reduce print quality.
HP does not recommend the full-time use of EconoMode. If EconoMode is used full-time, the toner
supply might outlast the mechanical parts in the toner cartridge. If print quality begins to degrade and
is no longer acceptable, consider replacing the toner cartridge.
NOTE:
This feature is available with the PCL 6 printer driver for Windows. If you are not using that
driver, you can enable the feature by using the HP Embedded Web Server.
1.
From the software program, select the Print option.
2.
Select the product, and then click the Properties or Preferences button.
3.
Click the Paper/Quality tab.
4.
Click the EconoMode check box.
Set the sleep delay
Set the sleep delay (LCD control panel)
NOTE:
This section applies to the HP LaserJet Pro 200 color M251n Printer model only.
1.
At the control panel, press the
OK
button to open the menus.
2.
Open the following menus:
●
System Setup
●
Energy Settings
●
Sleep Delay
3.
Select the time for the delay, and then press the
OK
button.
NOTE:
The default value is 15 minutes.
ENWW
Economy settings
67