HP LaserJet Pro 300 Color MFP M375 - Manual (Page 170)

Adjust the lightness or darkness for copies
1. Load the document onto the scanner glass or
into the document feeder.
2. From the Home screen, touch the Copy
button.
3. On the summary screen, touch the arrow
buttons to adjust the setting.
4. Touch the Black or Color button to start
copying.
Define custom copy settings
When you change the copy settings at the control panel, the custom settings remain in effect for
approximately 2 minutes after the job completes, and then the product returns to the default settings.
To immediately return to the defaults, press the Cancel button from the Home screen.
Print or copy edge-to-edge
The product cannot print fully edge-to-edge. The maximum printing area is 203.2 x 347 mm (8 x
13.7 in), leaving a 4 mm unprintable border around the page.
Considerations for printing or scanning documents with cropped edges:
● When the original is smaller than the output size, move the original 4 mm (1/6 inch) away from
the corner indicated by the icon on the scanner. Recopy or scan in this position.
● When the original is the size of the desired output, use the Reduce/Enlarge feature to reduce the
image so the copy is not cropped.
154 Chapter 10 Copy ENWW