Navigating to a host – HP OneView for Red Hat Enterprise Virtualization User Manual
Page 11
Navigating to a host
When you first log into RHEV-M and select the HP OneView tab (1 above), the Welcome tab in
the Global pane appears. This provides a brief overview of how to navigate the UI to see information
for a host that is provided by HP OneView for RHEV.
Figure 2 Welcome tab
To view information about one of your hosts:
1.
Select Hosts from the RHEV-M Resources Tabs.
2.
In the Hosts tab, select a specific host from the list of available hosts.
3.
Select HP OneView in the RHEV-M Details Pane. This will provide access to the Host Information
tabs and Action toolbar corresponding to the host you selected.
NOTE:
Before data can be acquired about a particular host (iLOs/servers, blade enclosures,
and Virtual Connect), it must be “discovered” and communication established using the proper
credentials. The following section explains how to discover hosts.
Navigating to a host
11