HP OneView for Red Hat Enterprise Virtualization - Manual (Page 8)

3. In order to use the HP OneView for RHEV reporting functionality, the RHEV-M reporting
packages must first be installed as follows:
•
Install the following RHEV-M reporting packages on the RHEV-M server:
◦
rhevm-reports-ver.rpm
◦
rhevm-dwh-ver.rpm
•
Execute the reporting package setup scripts:
NOTE: For RHEVM 3.4, these scripts are not required.
◦
rhevm-dwh-setup
◦
rhevm-reports-setup
•
Configure HP OneView for RHEV reporting support by running the setup file
hpovrhev_setup.py
.
NOTE: HP OneView credentials will be included.
8 Installation