Host information, Enclosure information, Networking information – HP OneView for Red Hat Enterprise Virtualization User Manual
Page 19
Host Information
The Host Information table contains:
•
Server Name—Server name defined by the host operating system or defined in the iLO GUI.
•
Product—Product name of the host.
•
UUID—Universally Unique Identifier assigned when the host was manufactured.
•
Serial Number—Server serial number, which is assigned when the host was manufactured.
•
iLO Address—Network IP address of the iLO subsystem.
•
iLO License—Level of licensed iLO functionality.
•
iLO Firmware—Version and date of the installed iLO firmware.
•
Host Power Status—Power status of the host (ON, OFF).
•
UID Light—State of the UID light (ON, OFF, FLASHING).
•
CPUs—Number of populated CPU sockets in the host.
•
Memory—Total amount of RAM in the host.
•
NICs—Number of available network interfaces on the motherboard (this does not include PCIe
cards or MEZZ cards).
•
System ROM—Host BIOS type and date.
Enclosure Information
The Enclosure Information data table contains:
•
Enclosure Name—Name of the enclosure as defined in the OA interface.
•
Rack Name—Name of the rack containing the enclosure.
•
Fan Bays—Total number of fan bays available in the enclosure, including empty bays.
•
Power Supply Bays—Total number of power supply bays available in the enclosure, including
empty bays.
•
Power Consumed—Total amount of power consumed by the enclosure.
NOTE:
Enclosure information is only available for blade servers.
Networking Information
The Networking Information data table contains:
•
Downlink—Internal port (enclosure midplane) on the Interconnect Module (blade switch or
Virtual Connect) that directly connects to the server blade’s NIC port.
•
Network Name—Name of the network associated with this port (value can be the network
name, “Unassigned,” or "Multiple Networks").
•
Uplink—External port on the Interconnect Module (blade switch or Virtual Connect module)
that directly connects to the external, upstream network device.
NOTE:
Networking information is only available for blade servers.
Overview
19