HP ProLiant ML310 G2 Server - Manual (Page 42)

42 HP ProLiant ML310 Generation 2 Server User Guide
•
•
•
•
All DIMMs installed must be the same speed.
BIOS detects the DIMM population and sets the system as follows:
Single-channel mode: DIMMs installed in one channel only.
Dual-channel asymmetric mode: DIMMs installed in both channels but of
unequal capacities per channel.
Dual-channel interleaved mode: DIMMs installed in both channels with
equal channel capacities.
The following table lists some, but not all, possible configurations. For best
performance, HP recommends dual-channel interleaved mode configurations.
Slot 1A Slot 2A Slot 3B Slot 4B Total Memory Mode
128 MB — — — 128 MB Single-channel
128 MB — 128 MB — 256 MB Dual-channel interleaved
128 MB 128 MB 128 MB — 384 MB Dual-channel
asymmetric
128 MB 128 MB 128 MB 128 MB 512 MB Dual-channel interleaved
256 MB — — — 256 MB Single-channel
256 MB — 256 MB — 512 MB Dual-channel interleaved
512 MB — — — 512 MB Single-channel
512 MB — 512 MB — 1 GB Dual-channel interleaved
1 GB — — — 1 GB Single-channel
1 GB — 1 GB — 2 GB Dual-channel interleaved
1 GB 1 GB 1 GB — 3 GB Dual-channel
asymmetric
1 GB 1 GB 1 GB 1 GB 4 GB Dual-channel interleaved
Installing DIMMs
1. Power down the server.
2. Remove the access panel ("Removing the Access Panel" on page 22 ).