GE PVB94STSS - Manual (Page 2)

2
Safety Information
WARNING:
TO REDUCE THE RISK
OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS,
OBSERVE THE FOLLOWING.
A. Use this unit only in the manner intended by the
manufacturer. If you have questions, contact the
manufacturer.
B. Before service or cleaning unit, switch power
off at service panel and lock the service
disconnecting means to prevent power from
being switched on accidentally. When the service
disconnecting means cannot be locked, securely
fasten a prominent warning device, such as a tag,
to the service panel.
• Do not attempt to repair or replace any part of
WKHGRZQGUDIWV\VWHPXQOHVVLWLVVSHFL¿FDOO\
recommended in this book. All other servicing
VKRXOGEHSHUIRUPHGE\DTXDOL¿HGWHFKQLFLDQ
• For general ventilating use only. Do not use to
exhaust hazardous or explosive materials and
vapors.
• Installation work and electrical wiring must be
GRQHE\DTXDOL¿HGSHUVRQ V LQDFFRUGDQFHZLWK
DOODSSOLFDEOHFRGHVDQGVWDQGDUGVLQFOXGLQJ¿UH
rated construction.
‡6XI¿FLHQWDLULVQHHGHGIRUSURSHUFRPEXVWLRQDQG
H[KDXVWLQJRIJDVHVWKURXJKWKHÀXH FKLPQH\ RI
fuel burning equipment to prevent back drafting.
Follow the heating equipment manufacturer’s
guidelines and safety standards such as those
published by the National Fire Protection
$VVRFLDWLRQ 1)3$ DQGWKH$PHULFDQ6RFLHW\
for Heating, Refrigeration and Air Conditioning
(QJLQHHUV $6+5$( DQGWKHORFDOFRGHDXWKRULWLHV
:KHQDSSOLFDEOHLQVWDOODQ\PDNHXS UHSODFHPHQW 
air system in accordance with local building code
requirements. Visit GEAppliances.com for available
makeup air solutions.
CAUTION:
7RUHGXFHWKHULVNRI¿UH
and to properly exhaust air, be sure to duct air
outdoors. Do not vent exhaust air into spaces
within walls or ceilings or into attics, crawl spaces
or garages.
BEFORE YOU BEGIN
Read these instructions completely and carefully.
•
IMPORTANT
– Save these instructions
for local inspector’s use.
•
IMPORTANT
– Observe all governing
codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the consumer.
• Note to Consumer – Keep these instructions
for future reference.
• Skill Level – Installation of these vents require
basic mechanical and electrical skills.
• Completion Time – 1 to 3 hours.
• Proper installation is the responsibility of the
installer. Product failure due to improper
installation is not covered under the warranty.
If you received a damaged vent, you should
immediately contact your dealer or builder.
For Monogram local service in your area,
1.800.444.1845.
For Monogram service in Canada,
1.800.561.3344.
For Monogram Parts and Accessories,
call 1.800.626.2002.
WARNING:
SHOCK HAZARD
This appliance must be properly grounded.
WARNING:
TO REDUCE THE RISK OF FIRE, USE ONLY METAL
DUCTWORK.