Aiwa CA-DW538 - Manual (Page 7)

0-9, +10
MODE
EQ
c PLAY
VOL i , k
s STOP
BAND
DISPLAY
r , t
ENGLISH
7
En
PRESETTING STATIONS
You can preset up to 15 stations in each band.
1
Select a station.
2
Press * s MEMORY once so that “M” is
displayed to store the station.
A station is assigned a preset number, beginning
from 1 in consecutive order for each band.
* or s STOP on the remote control
3
Repeat steps 1 and 2.
The next station will not be stored if a total of 15
preset stations have already been stored for a
band.
To listen to preset stations
Select a band then press e PRESET repeatedly.
c PLAY on the remote control is also available.
To select a preset number directly with the
remote control
Press the numbered buttons 0-9 and +10.
Example:
To select number 15, press +10 and 5.
To select number 10, press +10 and 0.
To clear a preset station
Select the preset number first. Within 4 seconds, keep
s pressed until “M” and the preset number disappear
in the display.
The higher numbers in the band are decreased by one.
Preset number
Frequency
SOUND ADJUSTMENT
Volume or tone adjustment does not affect
recording.
VOLUME (VOL)
Press VOLUME N or M . The volume level is
displayed as a number from 0 to MAX (25).
• The volume level is automatically set to 14 if the
power is turned off when the volume level is set
to 15 or more. (except when turning the power
back on within 4 seconds)
• Pressing DISPLAY on the remote control
displays the adjusted volume level.
3-mode equalizer
Press one of the 3-mode equalizer buttons (ROCK,
POP, JAZZ). The selected mode R (Rock), P (Pop)
or J (Jazz) appears in the display for 4 seconds.
To cancel, press the selected mode button.
ROCK - Emphasizes the high and low range of
music.
POP - Emphasizes voice and midrange of music.
JAZZ - Emphasizes the low range of music.
When using the remote control, press EQ
repeatedly until the desired mode is selected.
The equalizer mode changes to ROCK, POP, JAZZ
or no equalization, cyclically.
QSURROUND system
The QSURROUND system built into this unit uses
only two speakers at the left and right to create an
atmosphere that sounds as if you are surrounded
by two front speakers and two rear speakers.
Press QSURROUND and the QSURROUND
indicator lights up.
• The QSURROUND system does not work for
monaural sources.
• At higher volumes, turning QSURROUND on
may cause sound distortion. In this case, make
the volume down.