Installation instructions – GE AEN08LQ User Manual
Page 12
Installation Instructions
INSTALL THE AIR CONDITIONER
IN THE CASE (CONT.)
Attach the front grille to the case by inserting
the tabs on the grille into the slots on the front
top of the case. Push the grille in.
Secure the front grille to the case by replacing
the 2 screws removed earlier. Press on the top
of the grille to help with side screw installation.
Connect power.
10
D
INSTALL THE AIR CONDITIONER
IN THE CASE
Slide the air conditioner into the case by
the base pan. Do not push on the controls,
styrofoam air discharge housing or the finned
coils. Make sure the air conditioner is firmly
seated.
Replace the 2 ground screws removed earlier,
one on each side of the case.
IMPORTANT: The ground screws must be
reinstalled to ensure a proper ground.
Reinstall the control to the panel housing
by replacing the three screws you removed
earlier.
10
A
F
E
12
Do not press on
WKHVHDUHDV³
damage to the
unit may result
Base Pan
Install screws
B
C