GE AEQ12DQ - Manual (Page 9)

installation instructions
SToRM WinDoW ReQuiReMenTS
A storm window frame will not allow the air
conditioner to tilt toward the outside, and will keep it
from draining properly .
To adjust for this, attach a piece of wood to the sill .
WooD PieCeS
WiDTH: 2”
LengTH: Long enough to fit inside the window
frame .
THiCKneSS: To determine the thickness, place a
piece of wood on the sill to make it 1/2” higher than
the top of the storm window frame or the vinyl
frame .
Attach securely with nails or screws provided by the
installer .
WinDoW ReQuiReMenTS
• These instructions are for a standard double-hung
window . You will need to modify them for other types
of windows .
• The air conditioner can be installed without the
accordion panels if needed to fit in a narrow
window . See the window opening dimensions .
• All supporting parts must be secured
to firm wood, masonry or metal .
• The electrical outlet must be within reach of the
power cord .
1
PRePARe THe AiR ConDiTioneR
Hold the accordion panel in one hand and
gently pull back to free the open end .
Slide the free end of the accordion panel into
the side panel rails . Slide the panel down . Be
sure to leave enough space to slip the top
and bottom of the frame into the rails on the
cabinet .
noTe: There is a right and a left accordion
panel . Be sure to use the proper panel for each
side .
Slide the left and right accordion panels into
the top and bottom mounting rails .
3
A
C
Top left
Top right
2
1/2″ higher
than storm
window
frame
Storm window
frame
Wood
Sill
1/2″ higher
than vinyl frame
(on some windows)
Vinyl frame
Top mounting rail
B
9
15 ½” min.
22″ to 36″
(With accordion panels)
Bottom mounting rail