GE PW9000SFSS - Manual (Page 10)

10
Before You Begin
IMPORTANT: Save these instructions for the local electrical
inspector’s use.
IMPORTANT: OBSERVE ALL GOVERNING CODES AND
ORDINANCES.
NOTE TO INSTALLER: Leave these instructions with the
appliance after installation is completed.
NOTE TO CONSUMER: Keep this Owner’s Manual and
Installation Instructions for future use.
NOTE: This appliance must be properly grounded.
NOTE: Insure that the power cord does not contact the hot
surfaces on the bottom of ovens, cooktops, or any other
appliance.
Tools Needed
„ 2 x4 or 2 x 2 lumber for runners and brace
„ Wood screws and adhesive or other hardware for installing
runners or shelf to support warmer drawer.
Runners must be level, rigidly mounted and capable of
supporting 150 pounds.
„ Saw
„ Level
„ Drill and 1/16" bit
„ Phillips screwdriver
Custom Panel Kits
ZXD27B³7KLVNLWSURYLGHVIRUWKHLQVWDOODWLRQRIDFXVWRPIURQW
panel on 27" wide models.
ZXD30B³7KLVNLWSURYLGHVIRUWKHLQVWDOODWLRQRIDFXVWRPIURQW
panel on 30" wide models.
Product Dimensions
27" 23 1 ø 4
”
9”
1"
A
10 1 ш 2
”
26 1 ш 4
”
Including
handle Dimension A
27 ” Drawer 30 ” Drawer
26 3 ш 4
” 29 3 ш 4
”
Installation of the warming drawer.
Read these instructions completely and carefully.