How to connect electricity – GE ZICP360NXLH User Manual

Page 6

Advertising
background image

6

HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or
remove the third (ground) prong from the
power cord. For personal safety, this appliance
must be properly grounded.

The power cord of this appliance is equipped
with a 3-prong (grounding) plug which mates
with a standard 3-prong (grounding) wall outlet
to minimize the possibility of electric shock
hazard from this appliance.

Have the wall outlet and circuit checked by a
qualified electrician to make sure the outlet is
properly grounded.

Where a standard 2-prong wall outlet is
encountered, it is your personal responsibility
and obligation to have it replaced with a
properly grounded 3-prong wall outlet.

Use of a GFI (Ground Fault Interruptor) is not
recommended for the refrigerator outlet.

The refrigerator should always be plugged into
its own individual electrical outlet which has a
voltage rating that matches the rating plate.

This provides the best performance and also
prevents overloading house wiring circuits which
could cause a fire hazard from overheated wires.

DO NOT USE AN ADAPTER PLUG TO CONNECT
THE REFRIGERATOR TO A 2-PRONG OUTLET.

DO NOT USE AN EXTENSION CORD WITH
THIS APPLIANCE.

Never unplug your refrigerator by pulling on
the power cord. Always grip plug firmly and pull
straight out from the outlet.

Repair or replace immediately all power cords
that have become frayed or otherwise damaged.
Do not use a cord that shows cracks or abrasion
damage along its length or at either end.

When moving the refrigerator away from the
wall, be careful not to roll over or damage the
power cord.

Refer to the Installation Instructions for
particular electrical system specifications for this
refrigerator.

SAVE THESE

INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

Advertising
This manual is related to the following products: