GE ZIC360NXRH - Manual (Page 3)

94
Advance planning for built-in bottom-freezer refrigerators
These bottom-freezer refrigerators are factory set for a left or right door swing.
The door swing is NOT reversible. Choose an RH model with hinge on the right
side; the door swings left to right. Choose an LH model with hinge on the left
side; the door will swing right to left.
729Dia65
Standard Door Handle Framed Panel
Standard
Door Handle
3/4" Overlay Panel
1/4" Thick Backer Panel
.10" Thick Spacer Panel
696Dia9
Customization basics: framed or overlay panels, custom handles
and accessory kits
Professional refrigerators
ZICP360NxLH, ZICP360NxrH
Stainless steel-wrapped refrigerators with Professional handles,
louvered grille panel and chamfered door edges. These models
are shipped ready for installation.
European refrigerators
ZICS360NxLH, ZICS360NxrH
European-stye refrigerators have wrapped doors and grille panel,
beveled edges and tubular stainless steel handles. These models
are shipped ready for installation.
Custom refrigerators
ZIC360NxLH, ZIC360NxrH
Custom refrigerators are designed to be customized with
decorative panels. Field-installed custom door and grille
panels are required.
Framed panels
You may install 1/4"-thick custom panels from your cabinet
manufacturer. The decorative panel or accessory panel slides
into the factory-installed trim.
Standard supplied handles shown in 1/4" panel position.
Standard supplied handles shown in 3/4" overlay
panel position.
Overlay panels
You may also choose to install custom overlay panels
from your cabinet manufacturer. This design provides a
seamless appearance which integrates smoothly with
surrounding cabinetry.
Door handles
The supplied handles can be adjusted to accommodate both
framed or overlay panels. Custom handles of your choice,
supplied by your cabinetmaker, can also be installed. Order
ZKHCT handle side trim kit for installation of custom handles.
Side panels
Side panels must be used whenever the sides of the refrigerator
will be exposed.
Optional accessory kits
ZKHCSS2: Monogram stainless steel tubular handle kit
and handle side trim for custom handles. For use on
3/4" custom panels. Note: Fresh-food handle is 44-3/16" long,
freezer handle is 33-3/16" long, and diameter for each is 3/4".
ZKHPSS1: Professional stainless steel tubular handles designed
to fit 3/4" overlay panels. Kit includes one handle. Order two
kits for bottom-freezer refrigerators. Note: The Professional
handle is 31" long.
ZKHCT: Handle side trim kit for left-hand and right-hand doors.
For use on 3/4" custom panel when using a custom handle.
ZUG2: For side-by-side installation of two trimmed bottom-
freezer refrigerators. This kit provides for the installation of a
unified custom grille panel to span the width of two units using
a framed or overlay panel. Note: This kit will unify a left-hand and
right-hand door swing pair. It cannot be installed on two units
with the same door swing.
ZUGSS2: For side-by-side installation of two stainless
steel-wrapped bottom-freezer refrigerators. This kit provides a
unified stainless steel grille panel to span the width of two units.
Note: This kit will unify a left-hand and right-hand door swing pair.
It cannot be installed on two units with the same door swing.
ZUGPP2: For side-by-side installation of two Professional bottom-
freezer refrigerators. This kit provides for the installation of a
unified grille panel to span the width of two Professional units.
Note: This kit will unify a left-hand and right-hand door swing pair.
It cannot be installed on two units with the same door swing.
ZSAB1 kit
For use on the Jewish Sabbath and holidays. While in Sabbath
mode your refrigerator will still operate normally, but will not
respond to your actions.
605Dia26
Right-hand
door swing
Left-hand
door swing