AEG COMPETENCE E1100-4 - Manual (Page 41)

41
Installation Instructions
1
Attention: The new appliance may only be installed and connected by
a registered expert.
Please comply with this. If you do not, any damage resulting is not cov-
ered by the warranty.
1
Safety information for the installer
• The electrical installation is to be set up so that the appliance can be
isolated from the mains with a minimum 3mm all-pole contact sepa-
ration.
Suitable separation devices include e.g. cut-outs, fuses (screw fuses
are to be taken out of the holder), RCD’s and contactors.
• Anti-shock protection must be provided by the installation.
• The built-in unit must meet the stability requirements of DIN 68930.
• Built-in ovens and built-in cooking surfaces are fitted with special
connection systems. For safety reasons, they must only be combined
with appliances from the same manufacturer.