GE 169234 - Manual (Page 12)

12
CLEANING ANd MAINTENANCE
self-cleaning
• This function removes scale and mineral build-up in the steam chamber.
• Fill the iron to half its capacity with water ( filling the iron with water).
• Connect the power plug (13) to a suitable wall outlet.
• Turn the function control (4) to the dry ironing position (ill. g ).
• Set the temperature control (5) to the highest temperature linen-cotton .
• Place the iron on its heel (10) and let it heat up completely.
• Set the temperature control (5) to off and disconnect the iron from the wall outlet.
• Slide the function control (4) to the steam ironing position (ill. f ).
• Hold the iron over a sink with one hand, and press and hold the self clean
button (14) continuously with the other hand. CAuTion! Boiling water with steam
and impurities is ejected from the soleplate nozzles (15).
• Gently move the iron back and forth.
• Release the self clean button (14) when the water reservoir (12) is completely
empty.
Cleaning the iron
• Do not use harsh abrasives, chemical cleaners or solvents to clean the casing of
your iron, as these will damage its surface.
• To clean the occasional build-up of scale on the soleplate (15) and the casing, just
wipe with a soft damp cloth.
• Always store the iron in an upright position on its heel (10) (ill. d ).
storage
• To get the longest working life from your iron, it is best stored in a dry place.
• Turn the iron off and disconnect from the wall outlet, and empty the water
reservoir (12) ( Turning the iron off and emptying the water reservoir).
• Wait for the iron to cool and use the provided tie (13) to manage the power cord (13)
before storing.
• Store the iron on a stable shelf or in a cupboard. To avoid accidents, ensure that
both the iron and its power cord (13) are beyond reach of children or pets.
Iron-169234-04 (GB).indd 12 5/13/10 9:15 AM