Apple IEEE1394 - Manual (Page 22)

- 16 -
3. Wait for few seconds until the system prompts ‘The IEEE 1394 CD-ROM can now be safely
removed from the system’. Click OK, and then remove the IEEE 1394 cable from computer.
♦ Windows 2000:
1. Double-click on the icon on system tray and ‘Unplug or Eject Hardware’ dialog box appears.
2. Highlight the ‘IEEE 1394/Firewire IDE device IEEE 1394 SBP2 Device’ in the dialog box and
click Stop. At the next screen, click OK.
3. Wait for few seconds until the system prompts ‘The IEEE 1394/Firewire IDE device IEEE 1394
SBP2 Device can now be safely removed from the system’. Click OK, and then remove the IEEE
1394 cable from computer.
♦ Windows XP:
1. Click on the icon on system tray and a dialog box appears beside this icon.
2. Click ‘Safely remove IEEE 1394/Firewire Mobile solution IEEE 1394 SBP2 Device – Drive (D:)’
(The drive letter may differ from yours) in the dialog box.
3. Wait for few seconds until system prompts ‘The IEEE 1394/Firewire Mobile solution IEEE 1394
SBP2 Device can now be safely removed from the system’, remove the IEEE 1394 cable from
computer.
♦ Macintosh:
1. If there is a disc in the external DVD-ROM, you must take out the disc first. Click on the icon which
appearing with the title of disc, press to eject the disc tray of drive, take the disc out and
then reload the disc tray, the icon will disappear.
2. Remove the IEEE 1394 cable from computer.