American Fibertek RD-20D AFINETY - Manual (Page 4)

4
INSTALLATION
THE INSTALLATION OF THIS UNIT SHOULD BE MADE BY A QUALIFIED SERVICE
PERSON AND SHOULD CONFORM TO THE NATIONAL ELECTRICAL CODE,
ANSI/NFPA 70 AND LOCAL CODES.
The RD-20D occupies one slot of the SR-20D frame to be monitored. The unit may be
mounted into any slot. It is suggested that the unit be mounted adjacent to the PSR
power supply in the right hand slot number 1.
Align the unit with the gray card guides of the slot and slide it completely in until it stops
and the front panel meets the frame top and bottom rails. Use a small flat blade
screwdriver to push and twist the ¼ turn fasteners into place.
RD-20D Front Panel LED Indicators