American Fibertek RD-20D AFINETY - Manual (Page 7)

7
MENU SYSTEM
Top level menu commands may be executed by using the first two letters of the
command i.e. LO for LOGOUT or MO for MONITOR. Lower level commands require the
full command name to execute. Some commands require an entry (argument) to follow
the command on the same line.
MENU SYSTEMS OPTIONS
LOGOUT (LO) This command will log off the current user. To log back on the connection
will need to be re-established and the username and password will need to be entered.
IP (IP) The IP command menu gives access to setting the IP protocol setting required for
Ethernet communications. If you do not know the IP settings required to communicate on
your LAN, see your system administrator for details.
MONITOR (MO) The MONITOR command menu allows access via textual displays of
the status of all monitored parameters of the system. All status may be displayed or the
status of individual units may be displayed. Alarm conditions and limits may also be set
in this menu.
ADMIN (AD) Administrative settings are available in the ADMIN section. Here the
Username and Password may be configured along with the global settings of Site and
Rack Identification strings.
EMAIL (EM) Alarm instance reports can be sent to a single email address through this
setup. A domain name for the RD-20D is required along with a target email address. The
service may be started or stopped and notification timing parameters may be set.