American Fibertek RR-91685SL - Manual (Page 5)

5
RR-91685SL COMPONENTS
The RR-91685SL consists of the following components:
1) RR-980-1510
1) RR-CWDM-4 1) SR-20 1) BPS-1
1) RR-980-1530 4) PCSC/UPC-0.3 1) PSR-2 3) BPS-2
1) RR-482-1470/1490
The 980 series video rack cards and the data rack card that make up the RR-91685SL are
installed in a manner similar to the RT-91685SL (see drawing below). Mounting procedures and
recommendations should follow those used for the RT-91685SL.
RR-91685SL
POWER SOURCE
Power to the 980 series and 482 series rack cards is supplied by the subrack. Please refer to
the SR-20 and PSR-2 instructions for further details.
The CDWM unit is a passive device which does not require any power source.
POWER CONNECTION
Power is supplied to the individual 980 series and 482 series units via a four finger backplane
connector. The individual components can be inserted into the subrack or removed from the
subrack with power applied to the backplane. Please refer to the SR-20 and PSR-2 instructions
for details.
The CDWM unit is a passive device which does not require any power connection.