BEABA Sterilisers Stéril’express - Manual (Page 6)

6 7
Thank you and congratulations for choosing Steril’express: your new
appliance offers many unique features.
Steril’express is a fast and efficient sterilizer completing a full cycle in just 6 minutes.
SaFETY RECOMMENDaTIONS
• Read the instructions for use carefully before using your appliance for
the first time: any use which does not conform to these instructions will
absolve Beaba from any liability.
• Do not leave the appliance within reach of children without supervision (whether
it is on or off).
• any intervention other than cleaning and normal maintenance by the customer
must be carried out by Beaba service centre.
• For your own safety, use only Beaba accessories and spare parts which are
suitable for your appliance.
OPERaTING INSTRUCTIONS
• Before you begin sterilization it is very important that all your bottles and
accessories are washed with hot soapy water, fully rinsed and then emptied.
• Clean filter under running water before every use.
• Fill the measuring cup up to the water level mark (120 ml) with fresh cold water.
• Pour into the base of the sterilizer.
• The central rod fits into the bottom tray. Insert the rod; follow the arrows in the
plastic and twist to lock firmly in place. Insert bottle holder into sterilizer.
• Place the bottles upside down on the bottom tray.
• Slide the top accessory tray over the central rod. Push the top tray down on top
of the bottles to hold firmly in place during sterilization.
• Place the accessories (teats, caps, collars etc) around the top accessory tray.
• Place the lid on the sterilizer using the location latch at the back of the unit and
lock into place by clipping down the two lockable side handles.
• ensure the power cord is connected to the sterilizer. Then connect the power
cord to your wall socket.
• Press the 'power on’ switch to start the sterilization cycle.
• The lid handle will automatically change colour to show that the unit is hot (red
= hot).
• The sterilizer will switch itself off automatically at the end of the cycle after
approximately 6 minutes.
• For safety reasons, allow the appliance to cool for about 20 minutes before
repeating a sterilization procedure.
WaRNING!
Take care when opening the lid as the lid and the steam will be hot.
Bottle holder
Base of the sterilizer,
stainless steel element
Power light
Lockable side handles
Lid
Heat sensitive safety handle
Water measure, anti-scale filter
Pair of tongs
Removable power cord
PLeaSe ReaD THIS INSTRUCTION LeaFLeT CaReFULLY aND KeeP IT IN
a SaFe PLaCe
Beaba notice steril express v4.indd 6 07/05/10 10:04