Wiring diagrams cont, Troubleshooting, Maintenance – FanAm COMPAX Series User Manual

Page 4: Limitation of warranty and liability

Advertising
background image

Wiring Diagrams cont.

SPECIAL WIRING PRECAUTIONS

All installations should be wired according to the following diagrams.
Failure to comply will cause the motor to “hum” or not work.

1. Turn off power at service entrance before wiring this fan.

2. Read the fan serial number to determine the current draw. Check
that available supply is suitable.

3. Be certain to use proper connector type for securing conduit cable.

4. Connect electrical supply per diagrams supplied here.

Troubleshooting

1. If fan fails to operate, please check the following:

a) Fan has power.
b) Consult wiring diagrams included to assure proper connection.
c) To assure proper contact, check motor lead wiring, incoming supply wiring and capacitor connections.
d) If possible, use a meter to test for continuity between fan leads. Please note that capacitor will show no

reading if tested with meter.

2. If fan still fails to operate, consult FanAm Distributor for return/replacement instructions.

Maintenance

1. Since fan bearings are sealed and have been provided with an internal lubricating material, no lubrication is
necessary.
2. At least once a year, clean any particles accumulated in the fan.
CAUTION: Never attempt to open the fan without the electrical service to the fan locked in the “OFF” position.

Limitation of Warranty and Liability

This warranty does not apply to any FanAm product or part which has failed as a result of faulty installation or abuse, incorrect electrical connections or alterations made by others, or use under abnormal
operating conditions or misapplication of the products or parts. We will not approve for payment any repairs not made by us or our authorized agent without prior written consent. The foregoing shall constitute
our sole and exclusive warranty and our sole and exclusive liability, and is in lieu of all other warranties, whether written, oral, implied or statutory. There are no warranties which extend beyond the description
on the page hereof. We do not warranty that said goods and articles are of merchantable quality nor that they are fit for a particular purpose. Our liability on any claim of any kind, including negligence, for any
loss or damage arising from or connected with, or resulting from, the sale and purchase of the products and parts covered by this proposal, acknowledgement, order or from the performance or breach of any
contract pertaining to such sale of purchase, or from the design, manufacture, sale, delivery, resale, installation, technical direction in installation, inspection, repair, operation or use of any product or part
covered by the proposal, acknowledgement, order or furnished by FanAm shall, in no case, exceed the price allocable to the products or parts thereof which give rise to the claim and shall terminate at the end
of the applicable warranty period of said product or part. In no event whether as a result of breach of contract, or warranty or alleged negligence, defect, incorrect advice or other causes, shall FanAm be liable
for special or consequential damages, including but not limited to loss of profits or revenue, loss of use of equipment or any associated equipment, cost of capital, cost of substitute equipment, facilities or
services, downtime cost, or claims of customers of purchases for such damages. FanAm neither assumes nor authorizes any person to assume for it any other liability in connection with the sale of its products
or parts. Some jurisdiction do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusions may not apply to you.

EXTENDED WARRANTY

FanAm warrants its COMPAX Series fan and parts to be free from defects in workmanship and service for period of one (3) years from the date of purchase. If the unit is furnished with FanAm’s lint trap,
the warranty is extended to (5) years from the date of purchase.
Products and parts not specifically designed for use in a corrosive or explosive environment shall have no warranty and the user assumes
full liability for use in such environments. Our obligation under this warranty is limited to the repair or replacement as our option, without cost at our facility, of any part or parts thereof which shall, within the
warranty period, be returned to us with transportation charges prepaid, and which our examination discloses as being defective. All requests for repair or replacement must be directed to FanAm for
authorization prior to the return of any product or part. This warranty gives you specific legal rights and you may also have other rights in the jurisdiction in which you reside. (It is incumbent upon the claiment
to provide substantiation of purchase of installation dates if such question should arise.)

DISCLAIMER
FanAm Inc. has made a diligent effort to illustrate and describe the products in this literature accurately however, such illustrations and descriptions are for the sole purpose of identification, and do not
express or imply a warranty that the products are merchantable, or fit for a particular purpose, or that the products will necessarily conform to the illustrations.

Advertising