JELD-WEN JII022 Custom and Premium Pocket Windows - Manual (Page 3)

INSTALLATION INSTRUCTIONS
for Custom and Premium Pocket Windows (JII022)
3
EXTERIOR/INTERIOR INSTALLATION
For non-operating
units, remove and
dispose of wood stops
and sash or glass.
Exterior Installation:
Remove or cut exterior
blindstops at head and
sides flush with jambs.
Do not remove
interior trim stops or
sill stop.
Interior Installation:
Remove or cut any
interior trim stops
at head or sides
flush with jambs.
Interior trim stops
may be reused if not
damaged.
Do not remove
interior sill stop or
exterior blindstops at
head and sides.
REMOVE EXISTING SASH AND PREPARE OPENING
2
Exterior/Interior
Installation:
Apply 100%
polyurethane sealant
to sill/sill stop and sill/
jamb joints.
Interior Installation:
Also apply a 1/4"
bead of sealant
to interior side of
exterior blindstops
on sides and head. Jamb
Exterior Install
Remove
blindstops
Head
Interior Install
Head
Remove
trim stops
Do not remove
sill stop
Exterior/Interior
Installation:
For operating units,
remove and dispose
of existing sash,
balance system (e.g.,
cut balance cords and
unscrew pulleys), head
and jamb parting
stops.
Both Installs/Interior View
Remove old
balance system
Both Installs/Exterior View
Remove
parting stops
Both Installs/Exterior View
Sill/
sill stop
joint
Sill/jamb joint
Exterior
blind
stop
Interior Install
Exterior
blind
stop