King of Fans Belmont - Manual (Page 12)

Operation the
Remote Control
10.Care of Your Fan
1. Light Button:
Press and release the button to turn the
light ON or OFF. Press and hold the
button to set the desired light brightness.
The light will cycle between bright and
dim settings as long as the button is
pressed. The light key has an automatic
auto-resume feature that allows the light
to remain at the same brightness as the
last time it was turned off.
2. Speed Buttons
Press and release the button for the
desired speed.
3. Fan Off Button
This button turns the power off for the
fan.
Here are some suggestions to help you
maintain your fan.
1.
Because of the fan's natural
movement, some connections may
become loose. Check the support
connections, brackets, and blade
attachments twice a year. Make sure
they are secure. (It is not necessary to
remove fan from ceiling.)
2. Clean your fan periodically to help
maintain its new appearance over the
years. Do not use water when cleaning.
Use only a soft brush or lint-free cloth to
avoid scratching the finish. The plating
is sealed with a lacquer to minimize
discoloration or tarnishing. This could
damage the motor, or the wood or
possibly cause an electrical shock.
3. You can apply a light coat of
furniture polish to the wood for
additional protection and enhanced
beauty. Cover small scratches with a
light application of shoe polish.
4. There is no need to oil your fan.
The motor has permanently lubricated
sealed ball bearings.
WARNING
MAKE SURE THE POWER IS OFF AT THE
ELECTRICAL PANEL BOX BEFORE YOU
ATTEMPT ANY REPAIRS. REFER TO THE
SECTION, "MAKING ELECTRICAL
CONNECTIONS."