Manley СORE REFERENCE CHANNEL STRIP - MCORE001-025 4/2014 - 5/2014 User Manual

Page 4

Advertising
background image

c

o

r

e

c

o

r

e

1. Important Safety Instructions

1. Water and Moisture – Do not use The CORE near any source of water or in excessively moist

environments.

2. Object and Liquid Entry – Care should be taken so that objects do not fall, and liquids are not

spilled, into the enclosure through the openings.

3. Heat & Ventilation – When installing The CORE in a rack or any other location, be sure there is

adequate ventilation. Improper ventilation will cause overheating, and can damage the unit.
The unit should be situated away from heat sources, or other equipment that produce heat.

5. Power Sources – The CORE has a universal power supply which can operate in any country. It

has an input voltage range of 90-260 VAC at 50/60 Hz.

6. AC Power Cord - The CORE is permanently powered once the AC cord is plugged in. If The

CORE is not used for a long period of time it is advisable to unplug the AC power cord.

3. Cleaning - The CORE can be cleaned with just a damp cloth, or alcohol/methylated spirits for

more stubborn marks.

5. Damage - If after unpacking your CORE there are signs of shipping damage, contact your

dealer.

6. Servicing - Do not attempt any servicing without consulting your dealer or Manley

Laboratories, Inc. The user should not attempt to service the unit beyond that described in the
operating instructions. All other servicing should be referred to qualified service personnel.

7. DO NOT connect the AC supply cord until all other connections have been made. Afer initial

power up the VU Meter back light will “blink” for thirty seconds. The unit remains in MUTE
until this warm up period has elapsed.

2. Getting Started

Unpacking your

;

The

is secured in its packing carton by two end-caps.

Hold the unit by the middle and simply lift the unit vertically straight out of the box.

After it has been unpacked, check that nothing is loose when handling the unit. The unit is shipped
with the vacuum tubes installed. Make sure they are not loose by looking through the vent holes on the
top cover. Ensure they are standing upright in their sockets.

It is advisable to keep the original packaging. In the event of servicing or relocating, the original
packaging ensures that the unit will always be shipped safely.

This package contains the following;

1 x Manley

Reference Channel Strip

1 x Manley

Owner’s Manual

1 x IEC Power Cable
1 x Warranty Registration Card

CORE

CORE

CORE
CORE

3

Advertising