Mc Leod Original Street Twin - Manual

1
McLeod Street Twin Clutch System
Installation Instructions
All assemblies should be balanced to the flywheel you are replacing.
Street Twin assemblies are not Pre-Balanced from the factory.
Allow 500 city miles (1200 shift cycles) break-in period before hard driving.
When performance driving, all traction control devices
1) Inspect clutch assembly before disassembly. See Figure. 1. Note alignment marks.
must be turned off or clutch slippage will occur.
Figure 1
2) Unbolt pressure plate by removing six nuts. Note alignment mark (blue paint) on pressure
plate, floater and flywheel. These must be in same position when re-assembling
components.