Paragon H-D METALLIC FLAMES POPCORN MACHINE - Manual (Page 3)

Cart Features
1. Chip resistant coating for long-lasting, attractive finish.
2. Sturdy construction that withstands heavy commercial use.
3. Convenient storage area for quick storage and
retrieval of supplies.
4. Large, spoked wheels for easy mobility.
5. Collapsible construction that makes it simple to store
or take on the road.
Cart Assembly Instructions
1. Attach Handle to the cart body using four 1/4” - 20 x 3/4” bolts, flat washers, lock washers and hex nuts.
2. Turn assembly over on its top.
3. Install Long Legs to the same side of the cart body that the handle is attached to using four 1/4” – 20 x 2” Screws, flat washers,
lock washers, and hex nuts.
4. Press End Caps into the protruding end of legs.
5. Attach Short legs to the opposite side of the cart body that the handle is attached to using four 1/4” – 20 x 2” Screws, flat washers,
lock washers, and hex nuts.
6. Slide axle rod through the holes in the Short Legs.
7. Slide a wheel over the axle rod on the outside of Short Legs. Put a Clip Pin through the holes on each end to secure the wheels to the axle.
8. Turn assembly the correct side up and position the Cart Tray over the side of the cart body opposite of the handle.
3