Paragon H-D METALLIC FLAMES POPCORN MACHINE - Manual (Page 4)

Frequently Asked Questions
What Size Popcorn Machine Do I Need?
The best way to determine the actual size machine you will need is to figure out how many one-ounce servings you will go through in your busiest hour.
A one-ounce serving is a bag approximately 3 -1/2 " wide by 2" deep and 8" tall (if you use a different serving size, convert it to one ounce servings).
Divide the number of one-ounce servings per hour by 16 and you will have the size machine you will need to meet your busiest demand. Example:
In the busiest hour you use 125 one-ounce servings. 125 divided by 16 equals 7.81, so you should order an eight-ounce machine.
Why are hard-coat anodized aluminum kettles considered the best?
When you are cooking popcorn there are two key elements, heat transfer and ease of cleaning. Aluminum provides the best heat transfer of any
approved cooking material which means that the heat from the elements transfer completely to the food resulting in much better performance.
When you anodize aluminum you are changing the molecular surface of the aluminum and filling in the pores of the material. This makes a
very smooth and slippery surface which can be cleaned very easily and is extremely durable.
What makes popcorn pop?
A popcorn kernal actually has approximately 12% moisture inside of it. As you heat up the kernel the moisture turns into steam and expands.
Once the kernel reaches 475 degrees Fahrenheit the expanding steam forces the hull to explode (or pop).
How long does it take to cook a batch of popcorn?
This popper is designed to cook a kettle of kernels in approximately 3-1/2 minutes. The cycle time is based on having the kettle
heated to cooking temperature before loading the k ettle.
What type of oil should I use to cook popcorn?
The type of oil that you use will effect the taste of the popcorn. The most common type that is used is coconut oil. It normally is regarded
as the best tasting and has long been a staple at movie theaters. However, many health conscious people prefer canola oil due to its lower
fat and cholesterol content Other types that are often used are sunflower, peanut and soy.
Why do you make poppers in 120 volts and 240 volts?
Di f ferent countries have voltages on their electrici ty ranging from 100-240 volts.
You should always order the popper that most close ly matches the voltage of your electrical s ervice.
In the United States you should always use 120 volt poppers.
What's the best way to keep my popcorn machine clean?
This popper has tempered glass panels , stainless steel cleanout trays, aluminum corner posts which can be cleaned with vinegar and water.
The plated or anodized kettles are designed to be wiped out with a clean cloth after each use. You will want to note that you should never submerge
a kettle in any type of liquid because it has electrical components inside of it that can short out. Should you have a kettle that gets burned on oil stains
you can order Paragon's kettle cleaning kit (part# 1075) which will allow you to clean it to near new conditions.
What is "expansion ratio" on popcorn and what is the optimum level?
Expansion ratio refers to the increase in volume that occurs as popcorn pops. It is determined by measuring the volume of popcorn prior to and
after popping. An expansion ratio between 40 and 4 4 is usually considered ideal. If the expansion is less than 40 the popped corn can be a little
chewy and if the expansion ratio is over 44 the po pcorn becomes very brittle and tends to break apart into small pieces.
4
Warranty
Free replacement of any pa rt that fails within three years from day of manufactu re, excluding shipping costs.
Void if damaged by misuse, accidents, alterations, failure to follow instructions, fire, flood, and acts of God.
Ace Product Management Group, Inc.
Milwaukee, WI U.S.A.
If you have any questions or comments, please contact us at:
BrandedProducts.com