Quick Fuel Technology 30-230 230 HOT ROD FUEL SYSTEM User Manual
Page 2
Figure 1
CAUTION! Be sure the tank is full and fuel is at the pump inlet before attempting to run the pump. The pump should not
be operated dry.
MAINTENANCE:
If the vehicle is to be stored for long periods, it is recommended that the pump be operated, with fluid flowing, for several
minutes weekly to keep fluid passages clean and the bypass working freely. You can also drain the system and lubricate
the pump with a light oil spray.
Rebuild Kits are available
for the QFT™ 230 pump:
P/N 30-7300
– QFT™ 230/260 Pump Rebuild Kit
P/N 30-7305
– QFT™ 230 Pump Body & Seal Assembly
Figure 2
Figure 3
For warranty information, please see our website at
For further questions, please contact our technical department at 1-270-793-0900.
99-30-230
Date: 9-5-13