Rocky Mountain Radar KAT600 - Manual (Page 6)

d. Laser Alarm
“P, X, K/Ka, 2, 3, 4, L” LEDs flash with
audible tone. If the unit detects the laser signal
when the City mode is engaged, “P, X, K/Ka,
C, 2, 3, 4, L” LEDs will flash with audible
tone.
e. VG-2 Alarm
“ 2, 3, 4” LEDs flash with audible tone.
FEATURE MEMORY
The KAT600 will automatically remember your settings when the unit is
turned off or removed from the power. All features selected are retained
in memory-Bright/Dim/Dark, Audio Tone, City/Highway, VG-2, Mute,
and Laser scrambler.
VG-2 SELECT
Hold down the City button for three seconds.
The KAT600 will disengage VG-2 feature with beep sound.
Press City button again for three seconds.
The KAT600 will engage VG-2 feature with three beeps.
Factory detault is “VG-2 On”.
On start-up the KAT600 will sound the VG-2 alarm when the VG-2 is
selected to “On”.
FEATURE ENGAGE CONFIRMATION
Each time a button is pressed two beeps confirm feature “On”, one beep
confirms feature “Off”.
- 11 - - 10 -
Accessories are available as follows:
Windshield mount 5.00
Power Cord 5.00
Suction cups(set of two) 2.00
2amp fuses(two ea.) 2.00
Replacement owner’s manual 3.50
Add 10.00 shipping and handling per shipment
CAUTION
Tampering with unit
will result in a 75.00 repair fee!
WE DO NOT ACCEPT COD SHIPMENT
K. A. T. INC
301W OVERLAND AVE
EL PASO, TX 79901
915.533.1335
915.533.1344(FAX)
ACCESSORIES