Rocky Mountain Radar RMR-C430 User Manual
Page 5
Alarms: A separate alert tone will sound for each
band of Radar encountered with a different colored
light,
(Ka-Amber),
(K-Yellow),
(X-Green)
illuminated. Tone frequency will increase as signal
strength becomes stronger.
All alarm lights (X, K, Ka) will flash when Laser is
detected.
Signal Strength: Signal Strength will be first
indicated by the illumination of the LED of the band
detected, then the three red LED’s. When all three
are illuminated the signal is strongest.
VG-2: VG-2 detection is indicated with a separate
alarm along with the green power light blinking.
The detector is undetectable by VG-2.
Diagnostics: The RMR-C430 has a full internal
automatic diagnostic system. If the power light goes
off and remains off, check the 2-amp fuse in the
power cord by unscrewing the silver tip and
removing the fuse. If the fuse is good (wire inside the
fuse unbroken), return the unit for service.
P
3
1
K
2 C
X
T
P
3
1
K
2 C
X
T
P
3
1
K
2 C
X
T
P
3
1
K
2 C
X
T
P
3
1
K
2 C
X
T
P
3
1
K
2 C
X
T
P
3
1
K
2 C
X
T
P
3
1
K
2 C
X
T
5