Rocky Mountain Radar RMR-C430 - Manual (Page 8)

SCRAMBLER ACTIVATION:
All scramblers are factory set to the OFF
position.
RMR-C430 to turn the scrambler on/off, power off
the unit, press and hold the City button down while
turning power back on the unit.
If the scrambler is on, the “T” LED light will be
included in the start up sequence. If the scrambler is
off, the “T” LED light will not be included in the
start up sequence. The “T” LED light is the test
diagnostics for the scrambler.
SCRAMBLER OPERATION:
Drive normally. When the detector sounds an alert,
take your foot off the gas, check your speed, adjust if
necessary, and resume driving. Do not apply brakes
unless you are grossly exceeding the speed limit. The
scrambler will disable the radar long enough for you
to adjust speed safely, if necessary.
Important information:
When driving in states that ban scramblers –
turn off the scrambler function. Detectors are
legal in all states except Virginia and Washington
D.C. With the scrambler off, this unit is only a
detector.
8