Sper Scientific 850025 Mini Environmental Quality Meter User Manual
Page 8
Advertising
8
9
Display Mode text
An = Anemometer (Air velocity)/
Temperature
rH = Humidity/ Temperature
When the display shows the
desired mode, release
HOLD
and the meter will set this mode
as the default.
An Mode Selection
REC button = Enter button
1. With the power on, press
REC
for >3 seconds, the display
will show Unit. Release
REC,
then press to scroll through
the available scales. After the
desired scale is selected, press
REC to save as the default.
2. The next screen displays
“dCdF” with the current
temperature scale selection
(°C or °F) below. Press to
Advertising