Sper Scientific 850026 Mini Environmental Quality Meter User Manual
Page 9
Advertising
9
Anemometer (Air Velocity)/
Temp Measurement
Unit Selection
REC button = Enter button
1. With the power on, press
REC for >3 seconds, the
display will show Unit.
Release
REC, then press
to scroll through the available
scales. After the desired scale
is selected, press
REC to
save as the default.
2. The next screen displays
“dCdF” with the current
temperature scale selection
(°C or °F) below. Press to
select the desired scale. Press
REC to save as the default.
Note…
When CHiLL, rH, dP, _Et and
HEAt are the selected mode,
you may only change the
temperature scale setting.
(
°C or °F)
Advertising