Sper Scientific 850027 Mini Environmental Quality Meter User Manual
Page 11
Advertising
10
11
Air flow measurement
1. With the Power on, select Air
flow mode (refer to page 8)
2. Set the measurement area
dimension: Press
HOLD
once, the display will show
Hold then press
REC
continuously until the lower
left of the Display shows
m-2 or F-2
m-2 = meter square
F-2 = ft square
The unit of measure is
determined by the selected
scale CMM or CFM
3. Use
HOLD and to adjust
the air flow dimension value.
When the desired dimension
value is set, press
REC to
save as the default.
button = ▲button
HOLD button = ▼ button
REC button = Enter button
Advertising